jumpstart

solarrange

energy

Contact The Deltec Team







Deltec Solar Solutions

Search for a Product

energy

News

/News

Technical Bulletin – Lead Crystal Charging and Comissioning

Lead Crystal Charging and commissioning requirements. Initial charging current to be 0.3C ( IE 30 amps for each 100 A/H)a.This requirement is important and must be adhered too at all times. Bulk charging voltage is 2.45volt per cell @ 25°C (14.7 v for a 12volt block)a.Charging below this rate will result in partial charging [...]

By | March 27th, 2018|News|0 Comments

Technical Bulletin: CL009V1 – Hydrogen Ignition

Download Technical Bulletin: CL009V1 - Hydrogen Ignition

By | February 1st, 2018|News|0 Comments

Safety precautions to look out for when charging your battery

Follow general precautions: •Always wear proper eye, face and hand protection. •Always charge batteries in a well-ventilated area. •Keep vents tight and level. •Turn the charger and timer “OFF” before connecting the leads to the battery to avoid dangerous sparks. •Never try to charge a visibly damaged or frozen battery. •Connect the charger leads to [...]

By | March 15th, 2016|News|0 Comments

Know how to jump start a battery?

Jump Start your battery with ease Sometimes we end up crossing the highway or around the corner or worse, leave the lights on in the car and before we know it, our battery is dead. Boy oh boy, that is why we would like you to get going sooner rather than later. Keep jumper cables [...]

By | March 15th, 2016|News|0 Comments

Is your battery giving you some trouble-let us take a look

It can be frustrating when you have planned a long journey and the last thing on your mind is being late or delayed. Good news is, we are the battery experts and we are here to advise you on the health of your battery. Question 1. Not sure the condition of your battery? A. Battery [...]

By | March 14th, 2016|News|0 Comments